在使用焊接機器人進行工作的時候，技術人員一定要做好防護措施，以免發生危險，所以要做好機器人的檢修保養工作，下面山東數控焊接設備廠家為您講解分析。

When using a welding robot for work, technicians must take protective measures to avoid danger, so they must do a good job in the repair and maintenance of the robot. Now, Shandong CNC welding equipment manufacturer will explain and analyze for you.

1、保證作業區域和設備的整潔度，如果地面上有油、水、工具、工件等的話，可能會給操作人員帶來隱患，引發嚴重事故。

1. Ensure the cleanliness of the operation area and equipment. If there is oil, water, tools, workpieces, etc. on the ground, it may bring hidden dangers to operators and cause serious accidents.

2、當使用完工具之后都要將其放回到機器人動作范圍外的原位置保存，避免機器人與遺忘在夾具上的工具發生碰撞，造成損壞。另外各項操作都完成之后，不要忘了還要打掃機器人和夾具。

2. When the tool is used, it should be put back to its original position outside the robot's motion range to avoid collision between the robot and the tool forgotten on the fixture, causing damage. After all other operations are completed, don't forget to clean the robot and fixture.

3、對于負責機器人系統集成的人員、系統設備的設計、制造人員一定要理解掌握護欄以及設備的相關知識，有必要通讀手冊了解出現緊急情況時需采取的正確操作和措施。

3. Personnel responsible for robot system integration, system equipment design and manufacturing personnel must understand and master the relevant knowledge of guardrails and equipment, and it is necessary to read through the manual to understand the correct operation and measures to be taken in case of emergency.

4、工作人員，在作業之前要穿著特定的工作服，佩戴防護措施，起到充分的保護作用。還要嚴格遵守規則，避免出現意外的事故或傷害，負責機器人維護和檢查的人員一定要檢查和確認所有與緊急停止相關的電路，并使其按照對應的標準進行。在維護或檢查時，要確保隨時可按下緊急停止開關，以便需要時立即停止機器人的使用。

4. Workers shall wear specific work clothes and protective measures before operation to fully protect themselves. It is also necessary to strictly abide by the rules to avoid accidents or injuries. The person responsible for robot maintenance and inspection must check and confirm all circuits related to emergency stop and make them comply with the corresponding standards. During maintenance or inspection, make sure that the emergency stop switch can be pressed at any time, so that the robot can be stopped immediately when necessary.

以上就是使用焊接機器人的相關防護措施的相關注意事項，希望大家在使用中可以參考以上幾點進行使用，以免發生危險。更多相關內容的了解就來我們網站http://m.niuniury.com咨詢吧！

The above are the precautions related to the protective measures for using welding robots. I hope you can refer to the above points for use in order to avoid danger. For more information, please come to our website http://m.niuniury.com Consult!